Greene Tweed

Essential Duties/Responsibilities :  Production Operator I will be expected to perform a combination of the following in a clean room work environment.  Store, retrieve, assemble, and clean molds Load and unload ovens Operate mill and extruders to manufacture preform Operate presses, de-flash and inspect parts as necessary to ensure highest quality. Set up and finish trim parts Final inspection of parts using gauges, micrometers and other measurement tools as required Store, retrieve, assemble, and clean molds for production Operate assigned mill/extruder/press machines Follow all Work Instructions, SOP’s and SPCs to meet or exceed quality and production standards Record all information on GT data collection system as required Maintaining the production environment clean, tidy, and safe, including free of harmful elements. Rotate through at least two operations to maintain annual certifications. Required Minimum Qualifications Education/Certifications:  High School diploma or equivalent experience Skills and Experience: Must have the ability to learn and perform department tasks in a team-oriented environment.  Must have the ability to read, understand and perform work per the relevant work instructions.  Must be able to effectively operate equipment, execute process steps, prepare raw and semi-finished material, and inspect product during manufacturing stage. Previous manufacturing experience preferred. Familiarity with SAP (or comparable system) and basic computer skills desired. Strong work ethic and teamwork, willingness to learn new tasks, quality and safety mindset, maintain organized workplace, computer capable. Ability to reach 50% of certification of Chemraz production line skill sets within XX months, as follows: milling, extrusion, cutting to length, mold handle, molding, line pull, post cure, finishing, purification, packaging, slurry, and cleaning molds. Job Environment : Physical Requirements:          Standing: Frequently (46-100%) Sitting: Frequently (46-100%) Lifting: Up to 25lbs without assistance Carrying: Up to 25lbs without assistance Walking: Frequently (46-100%) Hearing: Ability to detect noises with or without corrective device(s) Vision: Clarity of vision, with or without corrective lenses Mental Requirements:            Problem Solving: Occasionally (16-45%) Making Decisions: Ability to make decisions that have a low impact Supervise: Rarely (0-15%) Interpret Data: Rarely (0-15%) Organize: Occasionally (16-45%) Read/Write: Frequently (46-100%) Communication: Frequently (46-100%) Work Environment High Temperatures: Rarely (0-15%) Low Temperatures: Rarely (0-15%) Noises: Loud (manufacturing environment, movement of large equipment):    Fumes Exposure: Rarely (0-15%)              Required Minimum Qualifications  This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR).  A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.   Note: This Job Description in no way states or implies that these are the only duties to be performed by the employee occupying this position.  Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by the Supervisor.  All requirements are subject to change and updates.    

Essential Duties/Responsibilities: Production Operator I will be expected to perform a combination of the following in a clean room work environment.  Store, retrieve, assemble, and clean molds Load and unload ovens Operate mill and extruders to manufacture preform Operate presses, de-flash and inspect parts as necessary to ensure highest quality. Set up and finish trim parts Final inspection of parts using gauges, micrometers and other measurement tools as required Store, retrieve, assemble, and clean molds for production Operate assigned mill/extruder/press machines Follow all Work Instructions, SOP’s and SPCs to meet or exceed quality and production standards Record all information on GT data collection system as required Maintaining the production environment clean, tidy, and safe, including free of harmful elements. Rotate through at least two operations to maintain annual certifications. Required Minimum Qualifications Education/Certifications:  High School Diploma/GED or equivalent experience Skills and Experience: Must have the ability to learn and perform department tasks in a team-oriented environment.  Must have the ability to read, understand and perform work per the relevant work instructions.  Must be able to effectively operate equipment, execute process steps, prepare raw and semi-finished material, and inspect product during manufacturing stage. Previous manufacturing experience preferred. Familiarity with SAP (or comparable system) and basic computer skills desired. Strong work ethic and teamwork, willingness to learn new tasks, quality and safety mindset, maintain organized workplace, computer capable. Ability to reach 50% of certification of Chemraz production line skill sets within XX months, as follows: milling, extrusion, cutting to length, mold handle, molding, line pull, post cure, finishing, purification, packaging, slurry, and cleaning molds. Job Environment: Physical Requirements:          Standing: Frequently (46-100%) Sitting: Frequently (46-100%) Lifting: Up to 25lbs without assistance Carrying: Up to 25lbs without assistance Walking: Frequently (46-100%) Hearing: Ability to detect noises with or without corrective device(s) Vision: Clarity of vision, with or without corrective lenses Mental Requirements:            Problem Solving: Occasionally (16-45%) Making Decisions: Ability to make decisions that have a low impact Supervise: Rarely (0-15%) Interpret Data: Rarely (0-15%) Organize: Occasionally (16-45%) Read/Write: Frequently (46-100%) Communication: Frequently (46-100%) Work Environment High Temperatures: Rarely (0-15%) Low Temperatures: Rarely (0-15%) Noises: Loud (manufacturing environment, movement of large equipment):    Fumes Exposure: Rarely (0-15%)              Required Minimum Qualifications  This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR).  A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.  

  The CNC Programmer will create, write, edit and test machining programs for multi-axis CNC Machines. Supports the design of required fixtures and tools needed for the manufacturing processes.   Essential Duties/Responsibilities: Create the CNC machining programs and setup documentation required to fabricate parts according to the customers' specifications. Works with machinists to troubleshoot machine and assists in adjusting machine controls and tool settings to keep dimensions within specified tolerances. Designs custom tooling and coordinates with tooling supplier as needed to ensure tools are received in time to complete parts machining consistent with all customers' delivery requirements Reviews part drawings (including RFQs) in order to develop accurate machining process routings and to estimate accurate machining times for cost analysis purposes. Maintains and updates CNC machining programs to ensure the existence of an accurate, accessible database and to ensure parts are fabricated to the latest customer revisions per ISO standards. Participates in continuous improvement projects to maximize performance in areas such as throughput, defect   Required Minimum Qualifications Education/Certifications: HS Diploma or equivalent Preference given to candidates with CNC machining/programming certification(s)   Skills and Experience: Minimum 5 years of CNC lathe and mill experience; Preference given to candidates with multi-axis lathe and 5- axis mill experience Intermediate knowledge of CAD and CAM systems or previous CNC programming experience required Experience with Fanuc and Mitsubishi based controls and G-code desired High proficiency in print reading and Geometric Dimensioning & Tolerancing required Selected candidate must have a strong detail orientation and demonstrated ability to multitask under time constraints Strong mathematical skills, coupled with the ability to visualize the work piece from print to final product required   Job Environment: Physical Requirements: Standing Occasionally (16-45%) Sitting Frequently (46-100%) Lifting Up to 10lbs without assistance Carrying Up to 10lbs without assistance Walking Frequently (46-100%) Hearing Ability to detect noises with or without corrective device(s) Vision Clarity of vision, with or without corrective lenses   Mental Requirements: Problem Solving Occasionally (16-45%) Making Decisions Ability to make decisions that have a low impact Supervise Rarely (0-15%) Interpret Data Frequently (46-100%) Organize Occasionally (16-45%) Read/Write Frequently (46-100%) Communication Frequently (46-100%)   Work Environment High Temperatures Rarely (0-15%) Low Temperatures Rarely (0-15%) Noises Moderate (business office with computers, printers and light office noises) Fumes Exposure Rarely (0-15%)   Required Minimum Qualifications   This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR).  A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.